Product Categories
(Total 10 Products for Steel Round Spiral Pipes And Fittings)
Steel round spiral pipes and fittings
Spiral steel pipe rust mainly using tools such as steel wire brush the surface grinding, cleaning and pre-heating coil can be removed loose or tilt of the oxide scale, rust, welding slag. Hand tools rust can reach Sa2 level, power tools rust can be achieved Sa3 level, if the coil attached to a solid surface oxide...
Marine construction stainless steel boat accessories
Allow us to advise you--We have suitable Stainless steel boat accessories for you: Standardly, the Stainless steel boat fittings are anticorrosive protected with a two-component paint, so that a reliable protection against corrosion is exist. Moreover, the surface is sanded and thus made non-slip. Therefore a separate...
304 stainless steel pipes fittings
Stainless steel tube according to the tube end state can be divided into light pipe and car wire pipe (with threaded pipe). Threading tube and can be classified as ordinary threading pipe (tube for conveying water, gas, and other low-voltage, by a common cylindrical or tapered pipe thread connection) and special screw...
Stamping elbow is the earliest application in mass production, the forming process of seamless elbow, at present, in the production of the elbow of the commonly used specifications has been hot pushingpipe method or other forming techniques of alternative, but in some specifications of elbow due to less number of...
Steel metal bending pipe fittings
Compared with the hot pushing process, stamping the appearance quality is inferior to the former; stamping elbow in the forming of arc in tension and other parts of excess metal is not the compensation, so outside the arc wall thickness reduction thin about 10%. However, due to the characteristics of the single piece...
Y pipe hydraulic bulging process can be a forming, high production efficiency; The y pipe and shoulders wall thickness were increased. For seamless tee hydraulic bulging process required equipment tonnage is larger, the current domestic is mainly used for less than the standard wall thickness of DN400 tee. Its...
Branch connection fittings of steel
The utility has a new addition to the traditional role of the tee, but also play the role of duplex valve that executives and branch output can select any one closed, the other for the smooth working condition; the utility model can also be arbitrary adjusting executives and branch pipe output flow ratio, as long as...
Metal material and perpendicular to the tee with a competent supervisor in charge of the side and communicating with the competent set of pipes, valves disposed in the corner of the intersection of the competent direction of the outlet manifold outlet direction is provided round the valve and the valve on the valve in...
Customized steel branch pipe fittings
Press material can be divided into the three-way metal and nonmetal materials. Metal tee carbon steel, stainless steel, alloy steel, malleable iron threaded tee is the standard production, the implementation of the national standard is GB / 12459-2005. Non-metallic materials have a three-way PVC, UPVC, PPR and so on....
As the appearance of the welding elbow, then we say that the appearance of the welding elbow bar. Welding elbow appearance are fixed, of course, the general welding elbow appearance is according to different steel tube and to choose the different knowledge of welding elbow, so, in order to ensure the welding elbow...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.